EasiCoat EC-100 Plus Crystal Clearcoat 4:1 qt Liquid Blue Can
$0
PRODUCT DESCRIPTION
Clearcoat in Medium Solid system is characterized by good hardness and resistance to UV
rays. It is resistant to troublesome weather conditions. It has very good resistance to stone
impact, coating does not chip off even with strong strokes of stones. Durability and excellent
gloss gives the coating the «colour depth» effect and guarantees its high quality. Is compatible
with all solvent basecoats and water basecoats. Occurs with hardener in slow, standard or
rapid version.
Descripción
MSDS No.：MS-QYEC-C100P
|
MIXING RATIO |
||
|
|
A: Clearcoat AT-100 PLUS [code: A-LBP] | 100 |
| B: Hardener AT-100 PLUS [code: A-UP] | 50 | |
| C: Acryl thinner AT-100 [code: A-RA] | 4 – 6% | |
| Comentarios: | Amount of thinner calculated for weight of the clearcoat. | |
| Do not use other thinner than acryl thinner AT-100. | ||
| APPLICATION | ||
|
|
Number of layers | 2 |
| Pressure | 2 – 2,5 bar | |
| Nozzle | 1.3 – 1.4 mm | |
|
|
Flash off between layers | 10 – 12 min |
|
|
Mixture life after mixing clearcoat with standard type of hardener | 60 min at 20°C |
The first layer of clearcoat is applied to the pre-dried layer of basecoat. Second layer of clearcoat should be applied as a full layer and left to complete flow and hardening. Coating of clearcoat can be hardened by using IR heater. Please note that IR heater should not be turned on earlier than after about 15 minutes after application last layer of clearcoat. When painting large surfaces it is recommended to use a hardener and the acryl thinner – slow version.
Valoraciones
No hay valoraciones aún.