PC-6234G 2K Sealer (Gray) 1 US Gallon (3.75L) 1005-MO189893

Descripción

COMPONENTS:
PC-6234 2K Sealer
PC-6256 Fast Activator <64°F
PC-6257 Medium Activator 64-86°F
PC-6258 Slow Activator >86°F

SUBSTRATES:
Dried and sanded existing paint film, primes and puttys.
SURFACE PREPARATION:
Remove wax, silicon or other contaminations
with 3910 Degreaser.

MIX RATIO:

POT LIFE:
@77° F
30 minutes with PC-6256
45 minutes with PC-6257/PC-6258

APPLICATION:

Spray gun set up:
Gravity feed: 1.2-1.5mm
3-5kg/cm2
Siphon feed: 1.4-1.7mm
3-5kg/cm²
Please refer to gun manufacturer for proper spray pressure
recommendations.

Coats & Thickness:
2-3 Coats, 40-60 um
Flash off time:5-10mins between
coats @77°F

DRY TIME:

@77°F
4~6 hours
@158°F
30 minutes

SANDING:

Non sanding: spray topcoat after surface drying
Drying sanding: P400-600
Wet sanding: P800-1000

Re-application
After surface drying or sanding, spray topcoats.
Note:
CLEARNING:
Clean equipment immediately with solvent
after application
Shelf Life: 2 years in original sealed can at cool and
dry place at 41-95°F.
PHYSICAL DATA:
VOC: 4.7 lbs/gal
FOR PROFESSIONAL USE ONLY
Read MSDS Before Use
NOTE: The information in this data sheet is based on our knowledge
and the current laws. It is always the responsibility of the user to fulfill
the requirements of local rules and legislations. The uncertain factors
may affect the application of products, such as the condition of
substrate. We do not accept any liability on loss, damage and
performance of products unless we issue a special agreement.
Always read the latest Material Data Sheet and the Technical Data
sheet before applying the products.