Perfecoat PC-3340 Adhesion Promoter Quart

Perfecoat PC-3340 ADHESION PROMOTER
DESCRIPTION:
Perfecoat PC-3340 is a single-component transparent fast
drying primer. It is used to promote adhesion of paint system
to plastic parts.

COMPONENTS:  PC-3340 Adhesion Promoter

SUBSTRATES:
Plastic parts PP, PA, PE.

SURFACE PREPARATION:
Wet sanding: Sanding with P800-P1000,
remove wax, silicon or other contaminations
with 3910 Degreaser.
Dry sanding: Sanding with cleaner.

MIX RATIO: Packaged ready to use

APPLICATION:
Spray gun set up and pressure:
RP: 1.3mm 29-36psi
HVLP: 1.3mm 26-29psi
Please refer to gun manufacturer for proper spray pressure
recommendations.

Coats & Thickness:
1-2 Coats, 4-5pm
Flash off time: 3-5 mins. between
coats @73°F
Air drying time: allow 5-10 mins. @73°F