Perfecoat PC-802 Standard Activator (65-86F) 2.5 Liter
$0
Perfecoat
DESCRIPTION:
Perfecoat PC-800W Super Clearcoat offers smooth paint
film and good gloss with durable resistance to weather and
pollution. It can be used for small spot repairs and overall
refinish and it is easy to apply.
| COMPONENTS: | ||
| PC-800W | Super Clearcoat | Sealer |
| PC-801 | Fast Activator | 86° F |
| PC-802 | Standard Activator | 64-86° F |
| PC-803 | Slow Activator | >86° F |
Descripción
SUBSTRATES:
Sanded and dried existing finishes, 1K or 2K primer
SURFACE PREPARATION:
Remove wax, silicon or other contaminations
with 3910 Degreaser.
MIX RATIO:
PC-800W
PC-801/802/803
2 parts
1 part
POT LIFE:
3-4 hours with PC-4612 @ 68° F
ADDITIVES:
• Blushing: 3960 Retarder Solvent over 86° F. Refer to tech
sheet of Retarder Solvent for details.
Fisheyes: 3930 Anti Silicon (0.5-1%) in the paint remained
and re-spray the affected area.
Overspray: 3920 Thinner SRA. Refer to tech sheet of
Thinner SRA for details.
APPLICATION:
Spray gun set up:
Gravity feed: 1.2-1.5mm
Siphon feed:
3-5kg/cm²
1.4-1.7mm
3-5kg/cm²
Please refer to gun manufacturer for proper spray pressure
recommendations.
Coats: 2-3 coats, 40-60pm
Flash off time: 3-5 mins.
between coats @73°F
Air drying: allow 15-20 mins.
purge time before baking.
DRY TIME:
@73°F
Dust free: 40 minutes
Dry to Polish: 6 hours
140°F
Dust free: 10 minutes
Dry to Polish: 30 minutes
CLEARNING:
Clean equipment immediately with solvent
after application
Valoraciones
No hay valoraciones aún.